Products  »  DIAMOND CARVERS

172018 Cone Diamond Carver

The 172018 Cone Diamond Carver is a 5/16 inch length x approximately 3/32 inch at the base. The 172018 diamond cone carver is mounted on a 3/32 inch shank. This diamond carver is similar to the 166023 diamond carver, except smaller. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. Great for intricate detail.

$7.25

Quantity:

166023 Cone Diamond Carver

The 166023 Cone Diamond Carver is a 3/8 inch length x approximately 3/32 inch at the base. The 166023 diamond cone carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. Great for intricate detail.

$11.00

Quantity:

250018 Diamond Carver

The 250018 Diamond Carver is a 3/8 inch length x 1/16 inch diameter diamond carver. The 250018 carver is mounted on a 3/32 inch shank. This carver is similar to the 166023 cone carver, but with rounded sides. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$7.25

Quantity:

198018 Diamond Carver

The 198018 Diamond Carver is a 5/16 inch length x 1/16 inch end diameter diamond carver. The 198018 carver is mounted on a 3/32 inch shank. The 198018 is a short, fat cone with a bit of a round end. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. The small diamond carvers are excellent for making habitat and detail work.

$7.25

Quantity:

010035 Reverse Cone Diamond Carver

The 010035 Reverse Cone Diamond Carver is a 3/32 inch length x 1/8 inch end diameter diamond carver. The reverse cone carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. Our diamonds are the finest carvers available. They last a long time!

$7.25

Quantity:

010040 Reverse Cone Diamond Carver

The 010040 Reverse Cone Diamond Carver is a 5/32 inch length x 5/32 inch end diameter diamond carver. The reverse cone carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$7.25

Quantity:

173040 Cylinder Diamond Carver

The 173040 Cylinder Carver is 3/16 inch diameter x 3/8 inch length diamond carver. This carver has a slight bit of taper to the cone. The cylinder shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$12.00

Quantity:

109030 Cylinder Diamond Carver

The 109030 Diamond Cylinder Carver is 1/8 inch diameter x 3/16 inch length diamond carver. This carver is similar to the D18, but with a flat end. The cylinder shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$11.00

Quantity:

D18 Cylinder Diamond Carver

The D18 is a 1/8 inch cylinder diamond carver. The D18 is similar to the 109030, but with a somewhat rounded top, Bullnose. The cylinder carver is mounted on a 3/32 inch shank. The carver is approximately 1/4 inch in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$12.00

Quantity:

110016 Cylinder Diamond Carver

The 110016 Cylinder Carver is 1/16 inch diameter x 1/4 inch length diamond carver. The cylinder shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$7.25

Quantity:

111021 Cylinder Diamond Carver

The 111021 Diamond Cylinder Carver is 5/32 inch diameter x 5/16 inch length diamond carver. The cylinder shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$7.25

Quantity:

130050 Cylinder Diamond Carver

The 130050 Cylinder Carver is 3/16 inch diameter x 1/2 inch length diamond carver. The cylinder shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$12.50

Quantity:

D16 Tear Drop Diamond Carver

The D16 is a 1/8 inch tear drop diamond carver. The tear drop carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$12.00

Quantity:

D17 Tear Drop Diamond Carver

The D17 is a 5/32 inch tear drop diamond carver. The tear drop carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. Note: The picture shows this carver a little oversize, please refer to the size listed above.

$12.00

Quantity:

D19 Flame Diamond Carver

The D19 is a 1/8 inch flame diamond carver. The flame carver is mounted on a 3/32 inch shank. The carver is approximately 5/16 inch in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$12.00

Quantity:

D20 Flame Diamond Carver

The D20 is a 1/8 inch diameter flame diamond carver. The flame carver is mounted on a 3/32 inch shank. The carver is approximately 3/8 inch in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$12.00

Quantity:

D25 Flame Diamond Carver

D25 is a 3/16 inch flame diamond carver. The flame shaped carver is mounted on a 3/32 inch shank. The carver is approximately 7/16 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D26 Flame Diamond Carver

D26 is a 1/4 inch flame diamond carver. The flame shaped carver is mounted on a 3/32 inch shank. The carver is approximately 1/2 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

001018 Ball Diamond Carver

The 001018 Ball Carver is 1/16 inch diameter diamond carver. The ball shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life. All of our diamond carvers are of the highest quality diamonds available.

$7.25

Quantity:

001029 Ball Diamond Carver

The 001029 Ball Diamond Carver is aproximatly 3/32 inch diameter diamond carver. The 001029 ball carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$7.25

Quantity:

D15 Ball Diamond Carver

The D15 is a 5/32 inch ball diamond carver. The ball shaped carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$8.75

Quantity:

001042 Ball Diamond Carver

The 001042 Ball Diamond Carver is a 5/32 inch diameter diamond carver. The 001042 carver is mounted on a 3/32 inch shank. This carver is very similar to the D15 diamond carver, for a little less money. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$7.25

Quantity:

D21 Ball Diamond Carver

The D21 is a 1/4 inch ball diamond carver. The ball carver is mounted on a 3/32 inch shank. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D24 Oval Diamond Carver

D24 is a 5/16 inch oval diamond carver. The oval shaped carver is mounted on a 3/32 inch shank. The carver is approximately 7/16 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D23 Inverted Pear Diamond Carver

The D23 is a 1/4 inch inverted pear diamond carver. The inverted pear shaped carver is mounted on a 3/32 inch shank. The carver is approximately 7/16 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D22 Pear Diamond Carver

The D22 is a 1/4 inch pear diamond carver. The pear shaped carver is mounted on a 3/32 inch shank. The carver is approximatly 7/16 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D29 Pear Diamond Carver

D29 is a 5/16 inch pear diamond carver. The pear shaped carver is mounted on a 3/32 inch shank. The carver is approximately 1/2 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$18.00

Quantity:

D27 Bullet Diamond Carver

D27 is a 1/4 inch bullet diamond carver. The bullet shaped carver is mounted on a 3/32 inch shank. The carver is approximately 1/2 in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$15.00

Quantity:

D30 Bullet Diamond Carver

D30 is a 5/16 inch bullet diamond carver. The bullet shaped carver is mounted on a 3/32 inch shank. The carver is approximately 5/8 inches in length. Fine diamond particles are bonded to a steel core for uniform shape. Diamonds are used for fine cutting and final finishes and have a long life.

$18.00

Quantity: